The post WaxedShine – WSP 15 – 15MM Throw DA polisher appeared first on CrazyDetailer.

The post WaxedShine – WSP MINI – 3″ 12mm throw appeared first on CrazyDetailer.

The post WaxedShine – WSP 12 – 12MM Throw DA Polisher appeared first on CrazyDetailer.

HOW TO USE:

1) Shake well before use.
2) Always wear gloves and a mask when installing a ceramic coating.
3) Using the suede applicator and block, apply 8 drops to the applicator.
4) Spread across the surface using a crosshatch pattern working in a 2 sq ft area.
5) Observe for the rainbow effect (Flashing) and wipe the surface using a new, scratch free microfiber until slick and clear to view.
6) Check for any residue left very carefully and remove straight away. Observe the suede application and swap out if needed.
7) Once finished, wait a minimum 1 hour before applying a second layer. Max 2 layers is recommended for best durability.
8) Maintain using Si02 based spray sealant. Keep surface dry for a minimum 24hrs and do not wash for 7 days to allow full cure time.

The post WaxedShine – Titanium T+SiO2 Coating (50ml) appeared first on CrazyDetailer.

Waxedshine Silica Soap is a pH neutral concentrate formulation that is safe to use on waxes, sealants and coatings as well as on vehicles with no coating applied to help add protection.

HOW TO USE

BUCKET WASH
1) Shake well before use. DO NOT work on a hot car or in direct sunlight.
2) Pre Wash the car using Waxedshine Citrus Pre Wash to ensure all the debris has been removed.
3) Pour up to 3 ounces into a 5 gallon bucket and fill with water agitating to create suds.
4) Use a new/clean microfiber wash mitt and gently wipe the surface.
5) Thoroughly rinse the vehicle making sure all residue has been removed.

FOAM CANNON
1) Shake well before use. DO NOT work on a hot car or in direct sunlight.
2) Fill the foam cannon with water so it is almost full but leave space to add the soap.
3) Add 3 to 4 ounces of soap to the 1L cannon , attach the bottle back to the cannon head and shake the mixture.
4) Rinse the car and pre wash if required prior to using Waxedshine Silica Soap.
5) DO NOT let the soap dry on the surface, if you see it drying, wet or apply more soap to keep it wet. Gently agitate with a wash mitt and make sure to thoroughly rinse off.
6) After around 2 to 3 washes with Waxedshine Silica Soap you will start to notice the hydrophobic boost and gloss levels increase.

The post WaxedShine – Silica Soap (500ml) appeared first on CrazyDetailer.

• Colour: White
• Polishing surface: 4” 100mm
• Backing size: 3″ 80mm

• Due to the numerous factors involved in machine polishing, polishing pads carry no warranty.

The post Waxedshine – Finishing Foam Pad (3″) appeared first on CrazyDetailer.

• Colour: Green
• Polishing surface: 4” 100mm
• Backing size: 3″ 80mm

• Due to the numerous factors involved in machine polishing, polishing pads carry no warranty.

The post Waxedshine – Heavy Cutting Foam Pad (3″) appeared first on CrazyDetailer.

• Color: Maroon (cutting)
• Polishing surface: 4” 100mm
• Backing size: 3″ 80mm

• Due to the numerous factors involved in machine polishing, polishing pads carry no warranty.

The post Waxedshine – Cutting Foam Pad (3″) appeared first on CrazyDetailer.

NOTE: Iron Off should not be used on bare metal, raw aluminium, bare metal parts, wheel balancing weights, or some paint repairs. If possible mask off those areas. Avoid letting Iron Off dry on any surface. Iron Off is easy to use and you can see it work almost instantly as it turns purple when it is in contact with ferrous particles. Iron Off turns iron fallout into a water-soluble particle making for easy removal when rinsing off. Iron Off works its magic instantly over 5 minutes at which point you can wash the surface and thoroughly rinse. In some cases, you may still want to clay the vehicle for a final, thorough prep process prior to polishing or protecting the paintwork.

HOW TO USE: WHEELS

1) Shake well before use.
2) If working on the wheels, work one rim at a time. Spray onto a cold wheel and allow Iron Off to start breaking down the ferrous particles.
3) To speed up the process use a wheel brush and gently agitate the rim.
4) Wait up to 5 minutes, do not let Iron Off dry on the surface. If needed apply more to keep the product wet. Rinse off with a hose or pressure washer.
5) Repeat the process for all the other wheels.

HOW TO USE: PAINTWORK

1) Shake well before use.
2) Make sure the vehicle has been thoroughly washed and is clean before continuing.
3) Once clean, mist Iron Off on to a cool vehicle, work areas that allow you to manage the process within a 5 minute dwell time.
4) It is important to make sure you do not let Iron Off dry completely on the surface. Wet if required to keep it active.
5) After up to 5 minutes, wash the vehicle again and throughly rinse off. Continue around the vehicle until completely decontaminated.

The post WaxedShine – Iron Off Fallout Remover (500ml) appeared first on CrazyDetailer.

AREAS YOU CAN USE DRESS ALL: Exterior plastics, exterior rubber trim, engine plastics and hoses, tires, interior plastics, interior vinyl trim, leather surfaces.

PRODUCT HIGHLIGHTS

• Concentrate formula
• Create a gloss or satin finish
• Interior and exterior use
• Water based formulation
• Silicone free

HOW TO USE

1. Shake well before use.
2. Test at full strength and dilute as necessary for a more satin finish.
3. Using a clean microfiber applicator to apply.
4. Evenly spread Dress All around the area you are working on and gently buff away any excess with a  clean microfiber towel.If diluting use distilled water and spray Dress All into the applicator before applying.
5. Repeat the above processes until finished.

The post WaxedShine – Dress All Concentrate (500ml) appeared first on CrazyDetailer.