The ultra-soft interior brush is fitted with synthetic non scratch bristles which will clean those difficult to reach areas. It is the perfect tool for interior cleaning of the entire dashboard and delicate centre console parts. Such like navigation screens, air con control switches, air vent grilles and steering wheel controls. It isn’t limited to interior use either, as it can also be used for cleaning delicate makers badges where non scratch bristles are a requirement.​

The pure natural brush is fitted with stiffer boars’ hair bristles for deeper cleaning of exterior areas such like alloy wheels, Brake Calipers, Engine Bays, Exhaust Tips and Door Shuts. They can also be used on hard plastics found on door sills to loosen dirt and grime before wiping or rinsing away.​

Key Features:​

• SOFT SYNTHETIC non scratch bristles​
• INTERIOR CLEANING for dashboard, navigation screens, air vents and gauges ​
• EXTERIOR CLEANING to makers badges & emblems

The post Turtle Wax – Ultimate Pro Detailing Brush Set appeared first on CrazyDetailer.

The soft microfine bristles on the white side loosen the ground in dirt and grime while the green microfibre side wipes away the dirty residues.

Paired with an appropriate interior cleaner the Scrub Warrior can be used on leather and Alcantara upholstery, dashboards, steering wheels and all interior plastics.

• Non-scratch deep cleaning and stain removal
• Multiple Cleaning areas including Leather seats/trims and steering wheels, dashboards, plastics, vinyl & more!
• Micro-bristles reach deep into the surface to scrub and clean for a like-new finish
• Microfibre wipes away the dirty residue
• Rinses clean under warm water and detergent

The post Turtle Wax – Ultimate Scrub Warrior Interior Micro Sponge appeared first on CrazyDetailer.

The HEX profile and clay polymer mix works quicker than conventional clay bars with a smoother glide across the surface. It is exceptionally easy to hold and fits all-sized hands for close control when compared to the difficulty and process of use for a traditional clay bar.

Should the worse happen and the mitt is dropped on the floor it can simply be rinsed and re-used where a conventional clay bar cannot.

The coverage and life of the mitt is exceptional, with treatment expected for up to 10 SUV-size cars.

Key Features:​

Prepares surfaces for polishes, coatings, waxes and sealants by removing embedded contaminants​
Restores smoothness to paintwork, chrome & glass​
Increases gloss and depth of shine​
Use with regular shampoo, snow foam or a spray detailer

• CLAY/POLYMER MIX removes embedded contaminants quicker than clay bars
• HEX PROFILE for smoother gliding across surface reducing re-contamination
• EASY HOLD & FIT to all hands for easy control v’s traditional clay bar
• RINSE & REUSE if dropped, no need to replace like traditional clay bars
• AMAZING GLIDING COVERAGE up to 10 SUV’s size car

The post Turtle Wax – Ultimate Clay Paint & Surface Prep Clay Mitt appeared first on CrazyDetailer.

Our simple, spray-on solution does most of the work, giving you more time to enjoy your car’s fast and flawless finish. It’s a win-win!

• Combines two steps in your wash and wax routine to save you time and money maintaining your car.
• Advanced drying agents repel water from wet surfaces to cut back on drying time
• Minute Wax Shine technology adds a layer of instant shine and protection
• One-step, spray-and-wipe solution makes it easy for anyone to achieve a spotless car detail

STEP 1

Wash your car with the car wash solution of your choice and rinse thoroughly from top to bottom.

STEP 2

While your car is still wet, spray Wax & Wash Dry Spray Wax onto all exterior surfaces of your car.

STEP 3

Use a microfiber towel to hand-dry your vehicle, allowing the formulaic drying agents to work their magic to reveal a quick and easy, sparkling finish.

The post Turtle Wax – Wax & Dry appeared first on CrazyDetailer.

• Tough on stains like coffee, chocolate, and milk.
• Kills odours and leaves a fresh fragrance.
• Suitable for vinyl and plastic.
• Suitable for both manual and machine application techniques.

DILUTION RATIO (MANUAL APPLICATION):

• Light Soiling: 1:10
• Medium: 1:5
• Heavy Soiling: 1:1
• Dilution Ratio (machine application)
• Add to machine tank up to a maximum dilution of 1:50

MANUAL APPLICATION:

• 1. Mix your chosen dilution ratio in a trigger spray bottle.
• 2. Apply liberally to the surface and leave to dwell for several minutes or longer if staining is severe.
• 3. Agitate the area with an interior detailing brush to bring out the stains.
• 4. Wipe away excess with a clean damp microfibre, if stain still present repeat steps 2-4.

MACHINE APPLICATION:

For machine application add to machine tank to a maximum dilution of 1:50 and follow the machine manufacturers application guidelines.

.

The post Turtle Wax – Pro Interior 1 Shampoo 5L appeared first on CrazyDetailer.

• Cuts through dried on oil, road grime, and grease.
• Safe on all surfaces including paintwork, plastic covers, rubber trims and seals.
• High foaming action to lift contaminants away safely from all surfaces.

STEP 1

Before application make sure the engine is cool to the touch.

STEP 2

Any open air intakes or electrical components should be covered and protected.

STEP 3

Spray the whole engine compartment liberally and allow to dwell for several minutes but do not allow to dry.

STEP 4

Agitate all the areas with a detailing brush to loosen grime, dirt and grease from the surfaces.

STEP 5

Rinse off with a pressure washer and dry all areas with a microfibre drying towel.

STEP 6

Remove the protective coverings which were applied in step 2.

.

The post Turtle Wax – Max Power Engine Degreaser 5L appeared first on CrazyDetailer.

• Use inside and out for a clear view of the road.
• Max strength formula to cope with whatever the road throws at you.
• Removes tobacco stains, finger marks and grime

The post Turtle Wax – Clearvue Glass Cleaner 5L appeared first on CrazyDetailer.

• Graphene & Acrylic Polymers restore, shine, and blacken dull textured plastic.
• Leaves behind superior UV protection against future fading, oxidation, and sun damage.
• Dry to the touch within minutes of application
• Coating doesn’t wash off and will endure seasonal exposure.
• Protects surfaces from fading due to the elements, car washing, and road salts

STEP 1

NB: Thoroughly clean and dry area to be restored. Use an all purpose cleaner to ensure that the area is extreme well cleaned of old dressings.

STEP 2

It is recommended that you wear gloves as the product is tinted black.
Apply a very small amount of product onto a foam applicator or microfiber towel. Using a combination of back & forth, & circular overlapping motions, treat area to be restored.
DO NOT be tempted to over apply product. Over application will result the product failing prematurely.

STEP 3

Once dry to the touch (3-5 minutes), a second application is necessary for even appearance and restoration.

STEP 3

Use circular motions to apply, with light pressure to blend and level.

Important application tips:

• Apply to cool, dry trim. Avoid application in direct sunlight.
• Use a damp towel to wipe any areas accidently treated with Trim Restorer immediately.

The post Turtle Wax – Hybrid Solutions Graphene Acrylic Trim Restorer (296ml) appeared first on CrazyDetailer.

This Product Includes :

• Friction-Reducing Detergents Provide Scratch-Free Cleaning

• Formulated with Premium Carnauba for Depth & Shine

• Infused with a Proprietary Caribbean Crush Scent

• Buffering agents (pH balanced) to neutralize harsh environmental pollutants and road soils

Where to use :

• Cars, motorbikes, trucks and vans!

How to use :

1. Pour 60mL of formula for each 4L of water
2. Rinse car with water to remove loose dirt
3. Wash car with foaming suds using a wash mitt, microfiber towel or sponge. Rinse clean and dry

The post Turtle Wax – Carnauba Wash & Wax Shampoo 1.42L appeared first on CrazyDetailer.

• Non-acidic pH-neutral formulation
• Works on contact no hard brushing required
• Safe for all alloys, decals and wheel nuts

STEP 1

Wheels should be cool to the touch. If the vehicle was recently driven, rinse wheels first with cool water.

STEP 2

Spray wheel on all areas to be cleaned. Allow 30 – 40 seconds for the product to penetrate dirt and brake dust. Rinse thoroughly with a strong stream of water from a hosepipe or a jet power washer.

STEP 3

In extreme cases wheels may need to be scrubbed with a brush before rinsing.

The post Turtle Wax – Redline Wheel Cleaner 5L appeared first on CrazyDetailer.