The spray-on, rinse-off application creates a long-lasting bond after water comes into contact with treated surfaces. Once activated, the product leaves a deep, glossy finish that feels slick to the touch. 303® Spray & Rinse Ceramic Sealant is also great for use on wheels, thanks to the easy activation method that eliminates the need to fit into tight spaces to achieve desired results.

• Quick ceramic protection in minutes
• Three simple steps: spray product on wet surface, rinse, and dry
• Smart formula activates once water makes contact with treated areas
• Provides six months of hydrophobic protection
• Use on paint, glass, wheels, metal, and chrome
• Leaves behind a slick glossy surface

How do I apply 303 Spray & Rinse

Wash your car out of direct sunlight while surface is cool.  While surface is still wet and out of direct sunlight, spray a small amount of product evenly across the surface, treating one section of vehicle at a time.  Only a light mist of product is needed.  Immediately rinse section off.  You will see water beading on the surface, meaning it is now protected.  Repeat steps on all sections of vehicle, and then dry thoroughly with a waffle weave drying towel or microfiber towel.

If I experience water spots or streaking after using 303 Spray & Rinse Ceramic Sealant, how do I remove?

Water spots and streaks can occur if the product is used on a hot surface, so make sure your vehicle is cool, wet, and out of direct sunlight when applying this product. If you experience spots or streaks due to using it on a hot surface, you will need to rinse the surface again, and then also use a microfiber towel to buff these off.

Spots and streaks can also occur if too much product is sprayed on, and not rinsed off thoroughly or quickly after applying. If spots occur due to this reason, they can easily be removed simply by rinsing surface off again.

Also, make sure you dry your vehicle like you normally would (drying towel, etc.) after applying product and rinsing off. Letting the vehicle air dry can also cause water spots to form.

Is 303 Spray & Rinse Ceramic Sealant safe for use on matte paint?

Yes, this product is safe for use on matte paint.

The post 303 – Spray & Rinse Ceramic Sealant (16oz) appeared first on CrazyDetailer.

Stop settling for ordinary spray coatings. Step into the next generation of automotive protection with DNA-e Onyx Graphene Spray Coating. This isn’t just another layer; it’s a technological leap forward, harnessing the groundbreaking power of graphene to deliver a shield unlike anything you’ve experienced before. DNA-e Onyx seamlessly blends cutting-edge science with stunning results, offering professional-grade defense in an incredibly user-friendly spray format.

Unparalleled Hydrophobicity: Water doesn’t just bead; it explodes off the surface. DNA-e Onyx creates an intensely hydrophobic effect, causing water, mud, and road grime to sheet away effortlessly, making washing a breeze and keeping your car cleaner for longer.

Why use DNA-e Onyx Spray Coating

• Pro-Level Performance, DIY Simplicity: Achieve show-car results in your driveway. The easy spray-on, wipe-off application requires no special tools or expertise. Apply to paint, glass, trim, wheels, and even plastics (always test first).
• Deep, Liquid Gloss & Clarity: DNA-e Onyx doesn’t just protect; it enhances. Experience a transformative depth of color, an intense wet-look shine, and exceptional clarity that makes your paint pop.
• Self-Cleaning Effect: The extreme hydrophobicity actively repels dirt, dust, and water spots. Rain becomes a natural car wash, significantly reducing the frequency and effort needed for maintenance washes.
• Smooth as Glass: Feel the incredible slickness the moment you run your hand over the surface. This ultra-smooth finish not only feels amazing but also minimizes friction, further enhancing dirt repellency.

Usage:

Do not apply in direct sunlight or if paintwork is warm to the touch.

• Prepare: Wash and decontaminate (clay bar recommended) the surface thoroughly. Ensure it’s completely dry and cool.
  • Pro Tip: Polishing prep the surface with DNA-e Revive Polish (for all colors) or DNA-e Ez-Glaze (for darker shades) to ensure maximum protection and endurance.
• Shake: Vigorously shake the DNA-e Onyx bottle.
• Spray:  Apply a light, even mist to one panel at a time (e.g., a door or half a hood) to prevent the product from curing before leveling.
• Spread: Using a high-quality, clean Magic-Grip microfiber applicator pad, spread the product evenly over the surface until clear.
• Buff: Immediately buff off with a clean, premium plush microfiber towel. Buff gently until the surface is perfectly clear and streak-free. Do not leave the product to dry for extended time to prevent “high spots”.
• Cure: Allow 1-2 hours before exposure to moisture for optimal bonding. Avoid washing for 24-48 hours.

The post DNA-e – Onyx Graphene Spray Coating (500ml) appeared first on CrazyDetailer.

Built from Insulator Wax technology, this super slick Topper/Maintainer combines high gloss shine and durable hydrophobics in a fast and easy sprayable application

• Provides High Gloss Shine
• Provides Durable Hydrophobic Weather Protection
• Can be layered over other Collinite Waxes/sealants (No. 845, No. 476, No. 915)
• Can be used as a stand alone protectant
• FOR AUTOMOTIVE AND MARINE USE

Size: 473ml (16oz)

The post Collinite – Insulator Speed Wax #S-845 appeared first on CrazyDetailer.

• 6+ Months of Stand Alone Paint Protection
• Extreme Hydrophobic Beading Effect
• Applied over Ceramic Coatings, Paint Protection Film
• For Paint, Glass, Wheels, Exterior Trim
• Easy Wipe On-Wipe Off High Gloss Shine
• Drying Aid (Once a Base Layer is Applied)
• UV and Detergent Resistant

Size: 473ml (16oz)

The post Collinite – BeadCoat (Ceramic + Graphene Paint Sealant) #100 appeared first on CrazyDetailer.

The post Shield – Ceramic-infused Spray Coating appeared first on CrazyDetailer.

The post Shield – Ceramic-infused Instant Detailer appeared first on CrazyDetailer.

Our simple, spray-on solution does most of the work, giving you more time to enjoy your car’s fast and flawless finish. It’s a win-win!

• Combines two steps in your wash and wax routine to save you time and money maintaining your car.
• Advanced drying agents repel water from wet surfaces to cut back on drying time
• Minute Wax Shine technology adds a layer of instant shine and protection
• One-step, spray-and-wipe solution makes it easy for anyone to achieve a spotless car detail

STEP 1

Wash your car with the car wash solution of your choice and rinse thoroughly from top to bottom.

STEP 2

While your car is still wet, spray Wax & Wash Dry Spray Wax onto all exterior surfaces of your car.

STEP 3

Use a microfiber towel to hand-dry your vehicle, allowing the formulaic drying agents to work their magic to reveal a quick and easy, sparkling finish.

The post Turtle Wax – Wax & Dry appeared first on CrazyDetailer.

• Stunning boost of shine & depth of color
• Hydrophobic protection from cross-linking acrylic polymers
• Anti-static resistance helps repel dust & keep surfaces cleaner longer.
• Easily layers on top of waxes or coatings.
• Patented Graphene infusion creates a TIGHTER WEB OF PROTECTION™

STEP 1

Wash, rinse, and towel dry your vehicle first.

STEP 2

Shake well., Use a sweeping motion to spray product directly onto surfaces.
Apply 2 sprays per panel on a dry paint surface.
In windy conditions, determine wind direction, and spray product away from you in a sweeping motion to maximize coverage. You may also spray product directly onto a microfiber cloth.

STEP 3

Spread and wipe with a clean, folded microfiber cloth to remove. Fold cloth as needed.

For best results, paint should be free of oxidation and surface contaminants.

NOTE:

Can be used on wheels, exterior glass, rubber and plastics. Compatible to use on top of previously applied professional coatings, sealants or waxes to enhance shine and gloss. Multiple applications builds additional layers of slickness and shine.

The post Turtle Wax – Hybrid Solutions Pure Shine Misting Detailer (591ml) appeared first on CrazyDetailer.

Turtle Wax Hybrid Paint Sealant Wax contains proprietary Hydrophobic Sealants infused with natural carnauba waxes to create levels of shine and surface slickness never seen before in a spray wax. Stunning results are sealed into the vehicle’s exterior surfaces ensuring that future washing and drying is even easier with one of our best car paint protection products. Can be applied to all exterior surfaces so no worry about overspray or residue build up.

The post Turtle Wax Pro – Seal & Shine Spray Wax Sealant (5l) appeared first on CrazyDetailer.

Easily removes all surface oils or filling agents and old waxes, revealing the true state of a surface.
Use of Panel Prep cleans surfaces completely, ensuring optimal bonding of coatings, waxes and sealants

Usage:

• Work on a cool surface out of direct sunlight.
• Spray on to the surface or onto a  Pearl weave microfibre towel and wipe down the painted surface.
• Do not over apply or allow the product to dry on the surface.

The post DNA-e – Revelation Panel Prep (1L) appeared first on CrazyDetailer.